I gotta say, I love my macbooks. Every Apple laptop I've owned that has USB-C ports will happily charge itself from a 5V/1.5A wall charger (albeit extremely slowly).
With 802.3bt type 4 (71W delivered, 90W consumed), absolutely achievable with the proper electronics, but would you trust a no-name, fly-by-night NIC to not fry your expensive devices? That's the biggest hurdle. Possibly a company like Apple, Anker, or similar megacorp or high-trust startup could pull if off.
For Thunderbolt 4/5 docks, I've held off from buying a high-end Thunderbolt 5 dock as many still have 2.5GbE Ethernet and other limitations with displays. The CalDigit TS5 Plus is one of the only options with 10GbE and its $500 (and usually OoS). I managed to buy an ex-corporate refurb HP Thunderbolt 4 G4 dock for only ~$64 and would recommend others do the same (this has an Intel 2.5GbE and good display outputs)
I have one of these, though I'm using with a USB 3.x port as that's what my desktop has. For me it's working fine, and for others with actual USB 4 ports it seems to be working properly for them.
Too bad this is 10Gbase-T, that energy-wasting hot-running garbage needs to die sooner rather than later. Good thing the ranges for 25Gbase-T are short enough to make it impractical for home use.
(Fibre is nowhere near as "sensitive" as some people believe.)
The problem with fibre isn't the sensitivity. It's that most endpoints have a 1Gbps copper port on them and then Cat6A ports can be used with the common devices but also allow you to add or relocate 10Gbps devices without rewiring the building again.
Will they be cheaper? I look at the RAM prices. Granted,
RAM is in a different category than USB adapters, but
I no longer trust anyone writing "will be cheaper" -
the reality may be different to the projection made.
"Card supports 10Gbit/s and 10/100/1000/2500/5000/10000Mbit/s Ethernet"
Nice to see; some NICs are shedding 10/100 support. Apparently, it's not necessary to do this, even in a low cost device.
https://hackaday.com/2023/08/14/adding-power-over-ethernet-s...
If anyone's aware of something better, I'd be interested too :)
(Then again I wouldn't voluntarily use 5Gb-T or 10Gb-T anyway, and ≈50W is enough for most use cases.)
[ed.: https://www.aliexpress.us/item/3256807960919319.html ("2.5GPD2CBT-20V" variant) - actually 2.5G not 1G as I wrote initially]
A lot of laptops won't accept less than 60w
My work laptop won't accept less than 90w (A modern HP, i7 155h with a random low end GPU)
At first everyone at the office just assumed that the USB C wasn't able to charge the pc
Might be a struggle I suspect!
https://www.aliexpress.com/item/1005008555989592.html
I have one of these, though I'm using with a USB 3.x port as that's what my desktop has. For me it's working fine, and for others with actual USB 4 ports it seems to be working properly for them.
[0]: https://global.icydock.com/product_247.html
Interestingly it seems to get burning hot on the MacBook M1 Pro while it remains cool on the M5 Pro model.
Maybe the workload is different, but I would not rule out some sort of hardware or driver difference. I only use a 1G port on my router at the moment.
(Fibre is nowhere near as "sensitive" as some people believe.)
What probably would is something like having PCIe and USB to 1Gbps fiber adapters that cost $5.
Anyone who talks about 25GBASE-T like it actually exists, doesn't know anything about what they're talking about.
To be fair, the power consumption is also my biggest gripe with my WiFi 6 AP, they run extremely hot.