I am ok assembling the machine and learning how to dial it in. I can do CAD work and make models by hand; I was a machinist in a past life. But, I am not very familiar with 'slicer' software yet.
I am ok assembling the machine and learning how to dial it in. I can do CAD work and make models by hand; I was a machinist in a past life. But, I am not very familiar with 'slicer' software yet.
6 comments
and
> durable, temperature/chemical resistant materials such as PC/Nylon/ABS or infused materials.
are a little cart-before-horse. This is like asking what ink-and-paper printer to buy for making complex, multi-format printed books to specific criteria, while admitting that you've not used any form of publishing software or understand any of the non-software processes involved in making a book.
The slicer is by far your most important tool for _effective_ 3D printing with a variety of materials, moreso than CAD or 3D modeling. Get a cheaper, more plug-and-play printer that doesn't meet all of your criteria, and focus on learning how to effectively use its slicer.
Print basic things, experiment, and force and make hands-on mistakes with it on relatively forgiving PLA/PETG. Do these _before_ jumping up to a pricier, fully enclosed machine _and also_ before printing harder-to-use materials, each of which will add new difficulties. You don't want your first hotend blob to happen on a decent machine that you actually like while using a material that's difficult or dangerous to deal with.
A Sovol SV06 or SV08 meets most of your criteria at about 1/3 to 1/2 of your budget; I haven't had the best experiences with their reliability but they fit many of your criteria. Used Creality Enders might be even cheaper depending on where you are, and while also fussy are hackable and repairable to the point of often being used as platforms for entirely different printers: https://www.youtube.com/watch?v=kmMW6_7lrlQ
To make a CNC machining metaphor - Slicer software is basically just your interface to the dials and knobs on the CNC settings for speeds and feeds. There's more settings, because 3d printing is more like if a CNC had a baby with a welder and an injection molding press, only it's injecting and simultaneously welding up a blob of plastic. You're balancing the toolpaths, the temps, the adhesion, and the overall speed all at the same time, all for whatever material you're using.
So it's complex, but these companies have a ton of data and experience in order to make sure their preset settings are damn good out of the box. And these days, they get it right more often than they get it wrong!
Long story short - you should probably just get a Bambu. You'll learn what you need to learn from it, while having good quality output the whole time. If you find out it's not suitable for what you're looking to do, then you can sell it used with decent resale and get the best printer for your specific application.
Excellent print quality out of the box Automatic bed leveling and calibration Very user-friendly with great software Compact size, perfect for beginners
Creality K1 Max (~$599)
300x300x300mm build volume Fast printing speeds (up to 600mm/s) Auto-leveling and enclosed design Good balance of features and price
Prusa MINI+ (~$429 kit, $529 assembled)
Exceptional reliability and support Magnetic flexible bed Excellent community and documentation Great for learning and consistent results
If you want a large printer that's decent for tinkering, Sovol SV08.
If you want relatively good support and to support a company that has a history of giving back, Prusa.
If you want something cheap with a lot of features that tend to be more high end, Elegoo Centuri Carbon.
If you just want something cheap that's arguably incredible value with an active community, Creality Ender 3 V3 KE.
Prusa is by far the most "open" probably with the SV08 second because it uses so much from the open source community (it's Voron inspired).
If you have a lot of time to spend, you could build a Voron, but I would not recommend that to anyone new to 3D printing.
I used to like the tweaking, but once I got a Bambu P1S, I've gotten spoiled just being able to hit print and let it go.
Prusa Core One would be a bit more complete OOTB. It is 220mm in the smallest axis (Y) though. Slicer and firmware are open source, but the hardware is not (unlike previous Prusa printers).
Bambu gives you the same capability for much less, but the firmware is not open source (third party open source firmware does exist). I believe the stock firmware also has to "phone home" at least once before it can be used offline.
Even cheaper are less-well known Chinese companies, like Qidi. Firmware is usually a proprietary fork of Klipper or other open source projects; some people have had success flashing the mainline version.
Is your goal to earn or learn?
How much time do you have to spend on 3d printing?
I can do what I need to do in CAD, design my own parts, etc. Other than the above, I'll use it for gifts, stuff around the home, rasPi and ESP32 electronic projects with home assistant, misc. enclosures, etc. I have a broad set of use cases but running production 24/7/365 isn't something I see myself doing unless I stumble upon a niche as I mentioned.